ZyXEL Communications 200 Series - Manual (Page 707)

Chapter 44 File Manager
ZyWALL USG 100/200 Series User’s Guide
707
"
“exit” or “!'” must follow sub commands if it is to make the ZyWALL exit sub
command mode.
Line 3 in the following example exits sub command mode.
Lines 1 and 3 in the following example are comments and line 4 exits sub command mode.
Lines 1 and 2 are comments. Line 5 exits sub command mode.
Errors in Configuration Files or Shell Scripts
When you apply a configuration file or run a shell script, the ZyWALL processes the file line-
by-line. The ZyWALL checks the first line and applies the line if no errors are detected. Then
it continues with the next line. If the ZyWALL finds an error, it stops applying the
configuration file or shell script and generates a log.
You can change the way a configuration file or shell script is applied. Include setenv stop-
on-error off in the configuration file or shell script. The ZyWALL ignores any errors in
the configuration file or shell script and applies all of the valid commands. The ZyWALL still
generates a log for any errors.
44.2 The Configuration File Screen
Click Maintenance > File Manager > Configuration File to open the Configuration File
screen. Use the Configuration File screen to store, run, and name configuration files. You can
also download configuration files from the ZyWALL to your computer and upload
configuration files from your computer to the ZyWALL.
interface dmz
ip address 192.168.5.1
!
!
interface dmz
# this is a note about the interface
!
! this is from Joe
# on 2008/02/26
interface dmz
ip address 192.168.5.1
!