Native Instruments MASCHINE MIKRO MK3 Groove Production Studio (Black) - Manual (Page 84)

Hardware
On the controller you want to use with the MASCHINE software, do the following:
▪ MASCHINE (MK3) controller: Press SHIFT + PLUG-IN , turn the 4-D encoder to select the
desired instance, and press the 4-D encoder or Button 4 to load it.
▪ MASCHINE STUDIO controller: Press SHIFT + PLUG-IN , turn the jog wheel to select the
desired instance, and press the jog wheel or Button 8 to load it.
▪ MASCHINE (MK1 & MK2) controller: Press SHIFT + STEP , turn Knob 8 (or press But-
ton 5/6) to select the desired instance, and press Button 8 to load it.
▪ MASCHINE MIKRO (MK1 & MK2) controller: Press SHIFT + F2 , turn the Control encoder
to select the desired instance, and press the Control encoder to load it.
▪ MASCHINE JAM controller: Press SHIFT + H ( INSTANCE ), turn the Control encoder to se-
lect the desired instance, and press the Control encoder to load it.
▪ KOMPLETE KONTROL Keyboard MK1: Press INSTANCE and turn the Control encoder to
select the desired instance, and press the Control encoder to load it.
▪ KOMPLETE KONTROL Keyboard MK2: Press INSTANCE and turn the 4-D encoder to se-
lect the desired instance, and press the 4-D encoder to load it.
3.3.8 Loading a Recent Project from the Controller
Your controller has a dedicated mode that conveniently allows you to use the controller to load
a Project that was recently opened.
To load a recent Project from the controller:
1.
Press the Project button (MASCHINE logo) at the top on the left-hand side of the control-
ler.
2. Turn the Encoder to find the recent Project you want to load.
3. Press the Encoder to load the selected Project.
Basic Concepts
Common Operations
MASCHINE MIKRO - Manual - 84