Native Instruments MASCHINE MIKRO MK3 Groove Production Studio (Black) - Manual (Page 639)

Parameter Description
MAIN Section
Mode Select a distortion type: Mullholland or Analog .
Drive Determines the basic amount of distortion.
Color At lower settings, the general sound is a bit more muffled; the
higher the settings, the brighter it sounds.
Feedback Adjust the amount of output signal fed back into the input.
Tone General tonal characteristic of the feedback signal.
Tone Mod Modulation introduced in the feedback signal.
OUTPUT Section
Mix Mix lets you adjust the amount of the effect in relation to the
dry original audio signal.
GATE Section
Gate The Gate button is used to cancel out feedback loops
introduced by high Feedback settings.
Release This parameter determines how fast the distorted sound dies
down when the Gate is enabled.
Analog Distortion
Analog mode adds grit to Drums and Percussion, Lead Synths and Guitars.
Element Description
MODE Section
Mode Select a distortion type: Mullholland or Analog .
DISTORTION Section
Saturation Sets the amount of saturation applied to the signal. Available values
range from 0.0 to 100.0% (default: 25.0%).
Effect Reference
Distortion Effects
MASCHINE MIKRO - Manual - 639