Snare – breaker, 10 snare – breaker, Main page – Native Instruments MASCHINE MIKRO MK3 Groove Production Studio (Black) User Manual
Page 355: Advanced page
9.3.10 Snare – Breaker
The Breaker snare is an acoustic high pitched snare drum that cuts through perfectly into mix-
es containing heavy bass. The adjustment of the wires spectrum provides a great range of
snares. It also works very well with the Rasper Kick.
The parameters described below are presented as they appear in the Control area (Arrange view).
The same parameters are available in the Plug-in panel within the Plug-in Strip (Mix view). See
Main Page
Element
Description
MAIN Section
Engine
Selects the engine used in the Snare plug-in. For more information
on the available engines, please refer to section
Tune
Adjusts the pitch of the drum played by the middle C, measured in
MIDI note numbers and cents. Available values range from 61.00
(
NOTE
C#3
) to 85.00 (
NOTE
C#5
). The default value is 73.00
(
NOTE
C#4
).
Decay
Adjusts the duration of the sound’s tail, measured as a percentage.
Available values range from 0.0 to 100.0% (default: 50.0%).
Skin Tune
Adjusts the fine-tuning of the skin of the drum, measured as a
percentage. Available values range from 0.0 to 100.0% (default:
50.0%).
Impact
Adjusts the amount of click or initial attack, measured as a
percentage. Available values range from 0.0 to 100.0% (default:
75.0%).
Advanced Page
For this engine the
Advanced
page does not contain any parameters.
Using the Drumsynths
The Snares
MASCHINE MIKRO - Manual - 355