Recording patterns in real time, 2, recording patterns in real, Time – Native Instruments MASCHINE MIKRO MK3 Groove Production Studio (Black) User Manual
Page 416: 2 recording patterns in real time
The Nudge Grid is not indicated in the Event area of the Pattern Editor.
Adjusting the Step Grid and the Nudge Grid on Your Controller
You can adjust the Step Grid and Nudge Grid resolution using your controller.
To adjust the Step Grid resolution:
1.
Hold
SHIFT
+
FOLLOW
(
Grid
) to enter Grid mode.
2.
Press the Arrow buttons to navigate to the Step setting.
3.
Turn the Encoder to select a resolution.
To change the Nudge Grid resolution:
1.
Hold
SHIFT
+
FOLLOW
(
Grid
) to enter Grid mode.
2.
Press the Right Arrow buttons to navigate to the Step Nudge setting.
3.
Turn the Encoder to select a resolution.
The new Nudge Grid resolution is directly in use, provided that the Step Grid is enabled.
11.2 Recording Patterns in Real Time
This section describes the various ways, features, and aids available on your controller to re-
cord Patterns as you play them in real time:
▪
The most common method is called overdub recording. Alternatively you can use replace
recording. Both are described in section
11.2.1, Recording Your Patterns Live
▪
Right before you record a new Pattern, you can quickly enter Record Prepare mode to ad-
just a few important settings for your Pattern: The Record Prepare Mode.
▪
At any time you can enable and customize the metronome:
.
▪
You can also start the recording with a count-in:
11.2.3, Recording with Count-in
▪
While recording you can let MASCHINE automatically quantize what you play on the pads:
Quantizing while Recording.
Working with Patterns
Recording Patterns in Real Time
MASCHINE MIKRO - Manual - 416