Native Instruments MASCHINE MIKRO MK3 Groove Production Studio (Black) User Manual
Page 490
Please refer to section
3.3.5, Navigating Channel Properties, Plug-ins, and Parameter Pages in the
Audio
page of the Output properties in the software and
from your controller.
Controls
Description
AUDIO Section
Dest.
Selects where you want to send the main audio output of your
channel.
For Sounds, available options are
None
(no output),
Master
,
Group
(parent Group, default setting), any other Group or any other Sound
acting as bussing point (i.e. containing an Effect Plug-in in its first
Plug-in slot), as well as the 16 external stereo outputs
Ext. 1
–
16
.
For Groups, available options are
None
(no output),
Master
(default
setting), any other Group acting as bussing point (i.e. containing an
Effect Plug-in in its first Plug-in slot), any Sound acting as bussing
point in any other Group, as well as the 16 external stereo outputs
Ext. 1
–
16
.
The available bussing points are labeled as described below.
Cue
When
Cue
is enabled, the main output of the channel is sent to the
Cue bus instead of its normal target (defined in
Dest.
, see above).
For example, this is very useful to pre-listen a channel before you
mix it in your performance. See also section
Note that when
Cue
is enabled, the channel’s Aux 1 and Aux 2
outputs are muted as well — but they are not sent to the Cue bus
(see
12.1.3, Setting Up Auxiliary Outputs for Sounds and Groups
).
Level
Adjusts the overall volume level of the channel.
Audio Routing, Remote Control, and Macro Controls
Audio Routing in MASCHINE
MASCHINE MIKRO - Manual - 490