Configuring the master and cue outputs of maschine, 4, configuring the master and cue, Outputs of maschine – Native Instruments MASCHINE MIKRO MK3 Groove Production Studio (Black) User Manual
Page 497
5.
In the channel strip of the desired Sound or Group, click the
AUX 1
or
AUX 2
label (de-
fault labels) at the bottom of the strip and select the desired destination in the menu.
This is equivalent to setting the
Dest.
parameter described above.
6.
Adjust the level for that auxiliary output via the little knob at the right of the menu.
This is equivalent to setting the
Level
parameter described above.
7.
Set the pre/post state of the auxiliary output by clicking the
Post
(or
Pre
) label right under
the menu.
This is equivalent to setting the
Order
parameter described above.
12.1.4 Configuring the Master and Cue Outputs of MASCHINE
All channels routed to the Master are mixed together and processed by the Plug-ins loaded in
the Master, if any. The result is then sent to the Master output (that is, MASCHINE’s main out-
put).
Audio Routing, Remote Control, and Macro Controls
Audio Routing in MASCHINE
MASCHINE MIKRO - Manual - 497