Native Instruments MASCHINE MIKRO MK3 Groove Production Studio (Black) User Manual
Page 81
Element
Action
Knob: Click the knob and drag your mouse vertically to change
the parameter value. Hold [Shift] on your computer keyboard and
drag your mouse to adjust the value in finer increments.
Button: Click the button to switch its state. When the button is
enabled, it shows a small colored LED.
Selector: Click the displayed value to open the drop-down list,
and click another value in the list to select it.
Navigating Plug-ins, and Parameter Pages using the Controller
On the controller, do the following:
1.
Set the focus on the desired Sound, Group or the Master (see section
).
2.
At the top of the controller, press the
PLUG-IN
.
3.
If you have more than one Plug-in loaded, use the Arrow buttons to navigate them.
4.
Press the Encoder to display the parameter properties of the selected Plug-in.
5.
Use the Arrow buttons to navigate through each parameter, or
SHIFT
+ Arrow buttons to
navigate the parameter pages of the selected Plug-in.
6.
Turn Encoder to adjust the value of the selected parameter. Hold
SHIFT
while turning the
encoder to adjust the value in finer increments.
7.
Press Plug-in again to return to the top level if you want to navigate the plug-ins again.
Basic Concepts
Common Operations
MASCHINE MIKRO - Manual - 81