Focusing on a group using the hardware, Focusing on a sound using the hardware – Native Instruments MASCHINE MIKRO MK3 Groove Production Studio (Black) User Manual
Page 76

The focused Sound slot is highlighted.
If the desired Sound does not appear in the Sound List, use the scroll bar at the right end of the
Pattern Editor or turn your mouse wheel while hovering the Pattern Editor to display any hidden
Sounds.
You can also select multiple Sounds at once to apply changes to all of them. See section
Selecting Multiple Sounds or Groups
for more information.
Focusing on a Group using the Hardware
1.
If necessary, press
GROUP
+ the Left or Right Arrow button below the display to switch to
the Group bank containing that Group.
2.
Press
GROUP
+ the pad
9
–
16
of the desired Group.
The corresponding Group is now in focus.
Focusing on a Sound using the Hardware
1.
If you want to set the focus on a Sound located in another Group, first set the focus on its
Group as described above.
2.
Press
SELECT
+ the pad of the desired Sound (or simply press its pad if pads are in Pad
Mode).
→
The corresponding Sound is now in focus.
For information on how to quickly switch between the Master, Group, and Sound level in the
software, see section
3.3.4, Switching Between the Master, Group, and Sound Level
Basic Concepts
Common Operations
MASCHINE MIKRO - Manual - 76