Native Instruments MASCHINE MIKRO MK3 Groove Production Studio (Black) - Manual (Page 369)

For more information on engines, see ↑ 9.1.1, Engines: Many Different Drums per Drumsynth . For
general information on the Snare and the other Drumsynths, see ↑ 9.1, Drumsynths – General Han-
dling .
9.5.1 Tom – Tronic
The Tronic engine is the default engine of the Tom.
A fat, analog-style tom with two tunable oscillators plus a tunable FM oscillator.
The parameters described below are presented as they appear in the Control area (Arrange view).
The same parameters are available in the Plug-in panel within the Plug-in Strip (Mix view). See
↑ 13.4, The Plug-in Strip for more information on this.
Main Page
Element Description
MAIN Section
Engine Selects the engine used in the Tom Plug-in. If you change this
setting, please refer to ↑ 9.5, The Toms .
Tune Adjusts the pitch of the drum played by the middle C, measured in
MIDI note numbers and cents. Available values range from 36.00 to
60.00. The default value is 36.00. For more details see
↑ 9.1.5,
Pitch Range, Tuning, and MIDI Notes .
Decay Adjusts the duration of the sound’s tail, measured as a percentage.
Available values range from 0.0 to 100.0 % (default: 50.0 %).
Using the Drumsynths
The Toms
MASCHINE MIKRO - Manual - 369