Percussion – shaker, 3, percussion – shaker, 3 percussion – shaker – Native Instruments MASCHINE MIKRO MK3 Groove Production Studio (Black) User Manual
Page 385: Main page
Element
Description
SCALE Section
Velocity
Adjusts the velocity response of the drum. Available values range
from -100.0 % to 100.0 % (default value). At zero (mid course),
the drum is played at full velocity, no matter how hard you hit the
keys (or pads). From that mid position, by turning the knob to the
right you increase the positive velocity response and make the drum
more and more sensitive to the velocities at which you hit the keys/
pads. From the mid position, turning the knob to the left as the
inverse effect: the harder you hit the key/pad, the softer the
resulting drum sound will be.
9.6.3
Percussion – Shaker
The Shaker is a versatile electronic shaker/maraca engine.
The parameters described below are presented as they appear in the Control area (Arrange view).
The same parameters are available in the Plug-in panel within the Plug-in Strip (Mix view). See
Main Page
Element
Description
MAIN Section
Engine
Selects the engine used in the Percussion Plug-in. If you change
this setting, please refer to
.
Tune
Adjusts the center frequency of the filter applied to the noise
source, which will define the pitch of the drum played by the
middle C, measured as a percentage. Available values range from
0.0 % to 100.0 % (default: 50.0 %). For more details see
Pitch Range, Tuning, and MIDI Notes
.
Using the Drumsynths
The Percussions
MASCHINE MIKRO - Manual - 385