Native Instruments MASCHINE MIKRO MK3 Groove Production Studio (Black) - Manual (Page 256)

Element Description
TYPE Sets the sequential order of the arpeggiated notes. Turn the Encoder
to choose from following settings:
UP starts from the root note and plays the notes up through the
chord.
DOWN plays the notes the other way around.
UP-DOWN plays the notes in both directions alternatively.
PLAYED plays the notes in the order you pressed down the
corresponding pads on your controller. If you have configured chords,
the arpeggio will first play all notes of the chord triggered by the first
pad you pressed, then all notes of the chord triggered by the second
pad you pressed, etc.
CHORD plays all notes of the chord together repeatedly.
RATE Adjusts the note length, hence the rate of the arpeggio. Available
values are 1 BAR and a series of note values going from 1/2 (half
note) until 1/128 (a hundred twenty-eighth note).
UNIT Selects from three variations of the original note length defined by
the
RATE parameter: NORMAL plays the original note length (default
setting), TRIPLET plays triplets of the original note length (faster,
three notes in the duration of two original notes), and DOTTED plays
dotted versions of the original note length (slower, two notes in the
duration of three original notes). Under Button 5–8, triplet values are
indicated by a “
T ” and dotted values by a “ D ” next to the note value.
Arp mode seamlessly switches to Note Repeat mode as soon as you switch your pads from Keyboard
mode to Pad Mode (see above): All current values (including the LOCK state) are retained.
Playing on the Controller
Performance Features
MASCHINE MIKRO - Manual - 256