Native Instruments MASCHINE MIKRO MK3 Groove Production Studio (Black) User Manual
Page 382
Element
Description
HARMONICS Section
KTr. Mode
(Key
Tracking Mode)
Selects from two key tracking modes:
Harmonic
(default) and
Dissonant
.
In
Harmonic
mode all oscillators track the
Tune
parameter (on the
Main
page, see above) and your keyboard evenly. Therefore, the
drum stays in tune with itself as the
Tune
parameter is adjusted,
and can be played chromatically across a keyboard or the pads.
In
Dissonant
mode the oscillators track the
Tune
parameter you’re
your keyboard) unevenly. Therefore, the drum produces dissonant,
detuned harmonics when the
Tune
parameter is adjusted or when
you play different notes on a keyboard or the pads.
Freq A
Adjusts the pitch of oscillator A within the feedback oscillator bank,
measured as a percentage. Available values range from 0.0 to
100.0 % (default: 50.0 %).
Freq B
Adjusts the pitch of oscillator B within the feedback oscillator bank,
measured as a percentage. Available values range from 0.0 to
100.0 % (default: 50.0 %). Note that this parameter has no effect
when
FM
and
AM
are set to zero (see below).
Freq C
Adjusts the pitch of oscillator C within the feedback oscillator bank,
measured as a percentage. Available values range from 0.0 to
100.0 % (default: 29.1 %). Note that this parameter has no effect
when
FM
and
AM
are set to zero (see below).
FM
Adjusts the amount of frequency modulation within the feedback
oscillator bank, measured as a percentage. Frequency modulation
tends to add bell-like, ringing overtones. Available values range
from 0.0 to 100.0 % (default: 34.4 %).
AM
Adjusts the amount of amplitude modulation within the feedback
oscillator bank, measured as a percentage. Amplitude modulation
tends to add brash, bright overtones. Available values range from
0.0 to 100.0 % (default: 18.6 %).
Using the Drumsynths
The Percussions
MASCHINE MIKRO - Manual - 382