Native Instruments MASCHINE MIKRO MK3 Groove Production Studio (Black) - Manual (Page 339)

Element Description
Gate When enabled, the decay of the drum is choked by the end of the
MIDI note. When disabled (default), the drum plays as a one-shot
sound, i.e. until the end of its tail, no matter when the note is
released.
Osc Mode Selects the oscillator mode: If you select Tonal (default), the engine
uses two oscillators running in parallel, the higher of which is extra
sensitive to velocity for increased expressivity. If you select Punchy ,
the engine uses one oscillator with a pitch envelope.
Osc Mix Only available if Tonal is selected in the Osc Mode selector (see
above). Adjusts the mix between both oscillators, measured as a
percentage. Available values range from 0.0 to 100.0 % (default:
50.0 %).
Punch Only available if Punchy is selected in the Mode selector (see
above). Adjusts the amplitude of the pitch envelope (punch),
measured as a percentage. Available values range from 0.0 to
100.0 % (default: 25.0 %).
NOISE Section
Color Adjusts the tone of the “snare” portion of the sound, measured as a
percentage. Available values range from 0.0 to 100.0 % (default:
50.0 %).
Amount Adjusts the level of the “snare” portion of the sound, measured as a
percentage. Available values range from 0.0 to 100.0 % (default:
25.0 %).
Advanced Page
For this engine the Advanced page does not contain any parameters.
Modulation Page
As with all other engines and Drumsynths, the Modulation page contains one parameter: Veloc-
ity .
Using the Drumsynths
The Snares
MASCHINE MIKRO - Manual - 339