Native Instruments MASCHINE MIKRO MK3 Groove Production Studio (Black) - Manual (Page 739)

Using the EDIT Page on Your Controller
In Sampling mode, the right Page button provides access to the Edit page so you can trim the
start and end points of a loop or one-shot sample using your controller. These parameters ad-
just the range that is played when you trigger a note.
Access the
Play Range parameters using the Page buttons.
Parameter Description
START Adjusts the start point of the play range in the Sample.
END Adjusts the end point of the play range in the Sample.
Press SHIFT + turn the Encoder to adjust the start and end points of the sample in fine incre-
ments. If necessary, you can refer to the software to see a visual overview of the sample wave-
form to help when editing.
17.3.2 Audio Editing Functions
In the Edit page, the Audio Toolbar provides various audio functions. These will be performed
on the selected region of the Sample, as defined by the Start and End parameters of the SE-
LECTION RANGE section (see ↑ 17.3.1, Using the Edit Page above).
► To apply any audio function to the selected region in your Sample, click the desired icon
in the Audio Toolbar.
These audio editing functions are destructive, i.e. they modify the audio material in the Sample.
However, your original Sample will not be modified: For each audio function that you perform, a
new, distinct copy of the Sample will be saved!
The playback settings of the Sample (e.g., tune, amplitude envelope, etc.) can be adjusted on the
Zone page. See section ↑ 17.5.4, Selecting and Editing Zones in the Map View for more information.
The Audio Toolbar.
Sampling and Sample Mapping
Editing a Sample
MASCHINE MIKRO - Manual - 739