Native Instruments MASCHINE MIKRO MK3 Groove Production Studio (Black) - Manual (Page 232)

Muting a Group
1. To mute a Group, click the Group index (letter + number) on the left side of the Group in
the Arranger:
Muting a Group.
2. To unmute the Group, click the Group index again.
Soloing Sounds and Groups on the Controller
1. Press SOLO to enter Solo mode.
2. To solo a Sound, press the related pad.
3. To solo a Group, press GROUP followed by the related pads 9 – 16 .
Muting Sounds and Groups
1. Press MUTE to enter Mute mode.
2. To mute a Sound, press the related pad.
3. To mute a Group, press GROUP followed by the desired pads 9 – 16 .
In both Solo and Mute modes you will note that on your controller the unmuted pads and
Group buttons are fully lit while the muted ones are dim lit (and the empty ones are off).
Since soloing a Sound mutes all Sounds except one, the MUTE button can then be used to “re-
lease” Sounds that have been muted. You can use this technique to create a breakdown: Solo a giv-
en Sound such as a kick drum, then build the track up again by bringing the muted Sounds back in
one at a time while holding the MUTE button.
Playing on the Controller
Playing Tools
MASCHINE MIKRO - Manual - 232