Native Instruments MASCHINE MIKRO MK3 Groove Production Studio (Black) - Manual (Page 255)

1. Press and hold NOTE REPEAT , then hold any pad.
The Sound of the pad is repeatedly triggered at the rate shown at the bottom of the con-
troller’s display.
2. Turn the Encoder to select another repetition rate.
→ This is a handy way to add live ornaments to your Pattern.
You can also use Note Repeat to program your Pattern (e.g., record a continuous hi-hat).
Note Repeat mode seamlessly switches to Arp mode as soon as you switch your pads from Pad
Mode to Keyboard mode (see below): All current values (including the
LOCK state) are retained.
Using Arp in Keyboard mode and Chords mode
If your pads are in Keyboard mode or Chords mode, pressing NOTE REPEAT ( Arp ) switches
your controller to Arp mode:
In Pad Mode, Keyboard mode and Chords mode you can customize the way the notes of the
played chord will be arpeggiated by adjusting following settings.
► Press the Arrow buttons to access following settings, and turn the Encoder to adjust val-
ues.
Playing on the Controller
Performance Features
MASCHINE MIKRO - Manual - 255