Native Instruments MASCHINE MIKRO MK3 Groove Production Studio (Black) User Manual
Page 495

The Aux page of the Output properties (here for a Group) in the software.
Please refer to section
3.3.5, Navigating Channel Properties, Plug-ins, and Parameter Pages in the
to know how to access the
Aux
page of the Output properties in the software and from
your controller.
Controls
Description
AUX 1 / AUX 2 Section
Dest.
Selects where you want to send the Aux 1 or Aux 2 output of your
channel. Available options are the same as for the
Dest.
selector of
the
Audio
page (see
12.1.2, Configuring the Main Output of
), except that for Aux 1 and Aux 2 the default
destination is
None
— in other terms there are no auxiliary sends
defined by default.
Level
Adjusts the level of the signal sent to the Aux 1 or Aux 2 output.
Order
If
Order
is set to
Pre
, the channel will be fed into Aux 1 or Aux 2
before
the
Level
and
Pan
settings of the
MAIN
section on the
Audio
page are applied. If
Order
is set to
Post
(default setting), the
Level
and
Pan
settings of the main output also affect the signals sent to
the auxiliary outputs.
If MASCHINE is running as a plug-in, the external stereo outputs
Ext. 1
–
16
available in the
Dest.
selectors of the
AUX 1
and
AUX 2
section will correspond to virtual outputs in your host. This allows
you to send auxiliary outputs of individual Sounds or Groups from MASCHINE to their own mixer
channels within your DAW, for example.
Setting Up the Auxiliary Outputs of Sounds and Groups in Mix View
You can also easily set up auxiliary outputs for your Sounds and Groups in MASCHINE’s Mixer:
Audio Routing, Remote Control, and Macro Controls
Audio Routing in MASCHINE
MASCHINE MIKRO - Manual - 495