Adept AdeptSight Reference Guide - Manual (Page 60)

AutomaticCandidateCountEnabled
VPARAMETER
5301
When AutomaticCandidateCountEnabled is True, the number of candidate measurement points is
automatically determined according to the dimension of the tool's region of interest. When
AutomaticCandidateCountEnabled is False, the number of candidate measurement points is set manually
through the CandidatePointsCount property.
Syntax
Micro V+
VPARAMETER (sequence_id, tool_id, 5301, index_id, object_id) = value
value = VPARAMETER (sequence_id, tool_id, 5301, index_id, object_id)
V+
VPARAMETER (sequence_id, tool_id, 5301, index_id, object_id) $ip = value
value = VPARAMETER ($ip, sequence_id, tool_id, 5301, index_id, object_id)
Type
Long
Range
Value Description
1 The number of candidate measurement points is set automatically.
0 The number of candidate measurement points is set manually.
Parameters
$ip IP address of the vision server. Applies to V+ syntax only. Uses standard IP
address format, for example: 192.168.1.120.
sequence_id Index of the vision sequence. The first sequence is 1.
tool_id Index of the tool in the vision sequence. The first tool is 1.
AutomaticCandidateCountEnabled
AdeptSight Reference Guide, v3.2.x, Updated: 5/8/2012
Page 60