Adept AdeptSight Reference Guide - Manual (Page 437)

SearchMode
VPARAMETER
5101
Specifies the method used by a Finder tool to select a hypothesis.
Type
Long
Range
The range depends on the type of entity. For arcs (Arc Finder Tool), the range is:
Value Description
0 hsBestArc Selects the best arc according to hypothesis strength.
1 hsArcClosestToGuideline Selects the arc hypothesis closest to the Guideline.
2 hsArcClosestToInside
Selects the arc hypothesis closest to the inside of the
tool Search Area. (closest to the tool center).
3 hsArcClosestToOutside
Selects the arc hypothesis closest to the outside of the
tool Search Area. (furthest from the tool center)
For lines (Line Finder Tool), the range is:
Value Description
0 hsBestLine
Selects the best line according to hypothesis
strength.
1 hsLineClosestToGuideline Selects the line hypothesis closest to the Guideline.
2
hsLine-
WithMaximumNegativeXOffset Selects the line hypothesis closest to the Search
Area bound that is at maximum negative X offset.
3
hsLine-
WithMaximumPositiveXOffset Selects the line hypothesis closest to the Search
Area bound that is at maximum positive X offset.
For points (Point Finder Tool), the range is:
SearchMode
AdeptSight Reference Guide, v3.2.x, Updated: 5/8/2012
Page 437