Adept AdeptSight Reference Guide - Manual (Page 201)

FilterHalfWidth
VPARAMETER
5202
Half-width of the convolution filter used by the tool to compute an edge magnitude curve from which
edges are detected. This value should be set to a value approximately equivalent to the width of the edge,
in pixels, as it appears in the image.
Syntax
Micro V+
VPARAMETER (sequence_id, tool_id, 5202, index_id, object_id) = value
value = VPARAMETER (sequence_id, tool_id, 5202, index_id, object_id)
V+
VPARAMETER (sequence_id, tool_id, 5202, index_id, object_id) $ip = value
value = VPARAMETER ($ip, sequence_id, tool_id, 5202, index_id, object_id)
Type
Long
Range
Minimum: 1
Maximum: 25
Parameters
$ip IP address of the vision server. Applies to V+ syntax only. Uses standard
IP address format, for example: 192.168.1.120.
sequence_id Index of the vision sequence. The first sequence is 1.
tool_id Index of the tool in the vision sequence. The first tool is 1.
ID 5202: the value used to reference this property.
index_id N/A
object_id N/A
FilterHalfWidth
AdeptSight Reference Guide, v3.2.x, Updated: 5/8/2012
Page 201