Adept AdeptSight Reference Guide - Manual (Page 223)

Found
VRESULT
1800
Found specifies if an entity was found. If True, then at least one entity (point, line or arc) was found in the
current image. Read only.
Syntax
Micro V+
value = VRESULT (sequence_id, tool_id, instance_id, 1800, index_id, frame_id)
V+
value = VRESULT ($ip, sequence_id, tool_id, instance_id, 1800, index_id, frame_id)
Type
Long
Range
Value State Description
0 False No entity was found.
1 True An entity was found.
Parameters
$ip IP address of the vision server. Applies to V+ syntax only. Uses standard
IP address format, for example: 192.168.1.120.
sequence_id Index of the vision sequence. The first sequence is 1.
tool_id Index of the tool in the vision sequence. The first tool is 1.
instance_id Index of the instance for which you want the result.
ID 1800: the value used to reference this property.
index_id N/A
frame_id N/A
Found
AdeptSight Reference Guide, v3.2.x, Updated: 5/8/2012
Page 223