Adept AdeptSight Reference Guide - Manual (Page 50)

ArcMustBeTotallyEnclosed
VPARAMETER
5141
When ArcMustBeTotallyEnclosed is True, the start and end points of the arc must be located on the
radial bounding sides of the Search Area. When set to False, the found arc can enter and/or exit the Search
Area at the inner or outer annular bounds of the Search Area.
Syntax
Micro V+
VPARAMETER (sequence_id, tool_id, 5141, index_id, object_id) = value
value = VPARAMETER (sequence_id, tool_id, 5141, index_id, object_id)
V+
VPARAMETER (sequence_id, tool_id, 5141, index_id, object_id) $ip = value
value = VPARAMETER ($ip, sequence_id, tool_id, 5141, index_id, object_id)
Type
Boolean
Range
Value Description
1
Start and end points of the arc must be located on the sides of the bound-
ing area.
0
Start and end points of the arc can be anywhere inside or outside of the
bounding area.
Parameters
$ip IP address of the vision server. Applies to V+ syntax only. Uses standard IP
address format, for example: 192.168.1.120.
sequence_id Index of the vision sequence. The first sequence is 1.
ArcMustBeTotallyEnclosed
AdeptSight Reference Guide, v3.2.x, Updated: 5/8/2012
Page 50