Calculated point properties – Adept AdeptSight Reference Guide User Manual
Page 551
Calculated Point Properties
The Calculated Point can be calculated based on the intersection two lines, a line and a circle, or midway
between two points. A Calculated Point tool is also used to place a fixed point in the field of view. A fixed
point could be used if you want to make all your measurements from a known reference point.. This tool
calculates a point based on a specific calculation mode. Possible modes are:
• Midpoint (midpoint between two points)
• Point and a line (closet point on the line to another point)
• Point and an arc (closest point on the arc to another point)
• Fixed point
• A line and an arc (Line/Arc intersection)
• Two lines (Line-line intersection)
• Two arcs (Arc-arc intersection)
Property Name
V+/MicroV+
Keyword
V+/MicroV+ ID
Access
Type
VRESULT
1001
R - O
Double
VRESULT
2400
R - O
Double
VRESULT
2401
R - O
Double
VRESULT
1310
R - O
Long
VLOCATION
1311
R - O
Location
VLOCATION
1371
R - O
Location
VRESULT
1010
R - O
Long
VPARAMETER
150
R / W
Boolean
Calculated Point Properties
AdeptSight Reference Guide, v3.2.x, Updated: 5/8/2012
Page 551