Adept AdeptSight Reference Guide - Manual (Page 410)

PositioningLevel
VPARAMETER
561
Configurable effort level of the instance positioning process. The value is expressed as a percentage. The
minimal allowable value is 10. Lower values will provide coarser positioning and lower execution time.
Conversely, a value of 100 will provide the highest accuracy for the positioning of object instances.
Syntax
MicroV+
VPARAMETER (sequence_id, tool_id, 561, index_id, object_id) = value
value = VPARAMETER (sequence_id, tool_id, 561, index_id, object_id)
V+
VPARAMETER (sequence_id, tool_id, 561, index_id, object_id) $ip = value
value = VPARAMETER ($ip, sequence_id, tool_id, 561, index_id, object_id)
Type
Long
Range
Minimum: 0
Maximum: 10
Parameters
sequence_id Index of the vision sequence. The first sequence is 1.
tool_id Index of the tool in the vision sequence. The first tool is 1.
ID 561: the value used to reference this property.
index_id N/A
object_id N/A
$ip IP address of the vision server. Applies to V+ syntax only. Uses standard IP
address format, for example: 192.168.1.120.
PositioningLevel
AdeptSight Reference Guide, v3.2.x, Updated: 5/8/2012
Page 410