Vrun program instruction – Adept AdeptSight Reference Guide User Manual
Page 39
VRUN program instruction
NOTE: This keyword can also be used to control the Adept AnyFeeder. For details, see the
, Rev B or later.
Syntax
Micro V+
VRUN
sequence_id
V+
VRUN $ip
, sequence_id
Description
Initiates the execution of a vision sequence.
Parameters
$ip
IP address of the vision server. Applies to V+ syntax only. Uses standard IP
address format, for example: 192.168.1.120.
sequence_id
Index of the vision sequence. The first sequence is 1.
Details
The sequence_id parameter is optional. This parameter is 1-based. If no value is provided for this
parameter, it defaults to 1.
For V+ systems, the vision server is the PC on which the AdeptSight vision software is running.
Example
; Execute the first sequence
VRUN $ip, 1
VRUN program instruction
AdeptSight Reference Guide, v3.2.x, Updated: 5/8/2012
Page 39