Adept AdeptSight Reference Guide - Manual (Page 127)

ColorFilterCount
VPARAMETER
5700
ColorFilterCount indicates the number of filters that are defined for the Color Matching tool. Read only.
Syntax
Micro V+
value = VPARAMETER (sequence_id, tool_id, 5700, index_id, object_id)
V+
value = VPARAMETER ($ip, sequence_id, tool_id, 5700, index_id, object_id)
Remarks
ColorFilterCount reports the number of filters that are defined in the tool, and that appear in the Filters
list in the interface. This value is not affected by the number of filter results in an image.
Type
Long
Range
Minimum: 0
Maximum: Unlimited
Parameters
$ip IP address of the vision server. Applies to V+ syntax only. Uses standard IP
address format, for example: 192.168.1.120.
sequence_id Index of the vision sequence. The first sequence is 1.
tool_id Index of the tool in the vision sequence. The first tool is 1.
ID 5700: the value used to reference this property.
index_id N/A
object_id N/A
ColorFilterCount
AdeptSight Reference Guide, v3.2.x, Updated: 5/8/2012
Page 127