Adept AdeptSight Reference Guide - Manual (Page 322)

MagnitudeThreshold
VPARAMETER
5200
Magnitude threshold sets the threshold used to find edges on the magnitude curve. A subpixel peak
detection algorithm is applied on the region of every minimum or maximum of the curve that exceeds this
threshold in order to locate edges.
Syntax
Micro V+
VPARAMETER (sequence_id, tool_id, 5200, index_id, object_id) = value
value = VPARAMETER (sequence_id, tool_id, 5200, index_id, object_id)
V+
VPARAMETER (sequence_id, tool_id, 5200, index_id, object_id) $ip = value
value = VPARAMETER ($ip, sequence_id, tool_id, 5200, index_id, object_id)
Type
Double
Range
Minimum: 0
Maximum: 255
Parameters
$ip IP address of the vision server. Applies to V+ syntax only.
Uses standard IP address format, for example:
192.168.1.120.
sequence_id Index of the vision sequence. The first sequence is 1.
tool_id Index of the tool in the vision sequence. The first tool is 1.
ID 5200: the value used to reference this property.
index_id N/A
object_id N/A
MagnitudeThreshold
AdeptSight Reference Guide, v3.2.x, Updated: 5/8/2012
Page 322