Adept AdeptSight Reference Guide - Manual (Page 131)

ConformityTolerance
VPARAMETER
556
Maximum local deviation between the expected model contours of an instance and the contours actually
detected in the input image. It corresponds to the maximum distance by which a matched contour can
deviate from either side of its expected position in the model. This property can only be set when
UseDefaultConformityTolerance is set to false. Read only otherwise.
Syntax
MicroV+
VPARAMETER (sequence_id, tool_id, 556, index_id, object_id) = value
value = VPARAMETER (sequence_id, tool_id, 556, index_id, object_id)
V+
VPARAMETER (sequence_id, tool_id, 556, index_id, object_id) $ip = value
value = VPARAMETER ($ip, sequence_id, tool_id, 556, index_id, object_id)
Type
Double
Remarks
This property can be set to any positive value if ConformityToleranceRangeEnabled is set to False.
Type
Double
Range
Minimum: MinimumConformityTolerance
Maximum: MaximumConformityTolerance
Parameters
$ip IP address of the vision server. Applies to V+ syntax only. Uses standard IP
ConformityTolerance
AdeptSight Reference Guide, v3.2.x, Updated: 5/8/2012
Page 131