Savevisioncalibration – Adept AdeptSight Reference Guide User Manual
Page 433
SaveVisionCalibration
VPARAMETER
10323
This command code is not directly supported in AdeptSight 3.x at this time. Please
contact Adept Technical Support for programming options.
Saves the vision calibration data for the specified camera to a calibration file (*hscal).
Syntax
V+
VPARAMETER(-1, -1, save_type, parameter_index, object_index) $ip = file_index
MicroV+
VPARAMETER(, , load_type, parameter_index, object_index) = file_index
Type
Long
Example
See SaveSequence for an example of use of all Load and Save properties.
Related Properties
SaveVisionCalibration
AdeptSight Reference Guide, v3.2.x, Updated: 5/8/2012
Page 433