Adept AdeptSight Reference Guide - Manual (Page 177)

Edge2Radius
VRESULT
1955
Radius of the second edge of the selected pair. ToolPositionX and ToolPositionY ar at center of the circular
arc described by the selected edge. Read only.
Syntax
Micro V+
value = VRESULT (sequence_id, tool_id, instance_id, 1955, index_id, frame_id)
V+
value = VRESULT ($ip, sequence_id, tool_id, instance_id, 1955, index_id, frame_id)
Type
Double
Range
Greater than 0.
Parameters
$ip IP address of the vision server. Applies to V+ syntax only. Uses standard IP
address format, for example: 192.168.1.120.
sequence_id Index of the vision sequence. The first sequence is 1.
tool_id Index of the tool in the vision sequence. The first tool is 1.
instance_id Index of the instance for which you want the result.
ID 1955: the value used to reference this property.
index_id Index of the edge pair. Range [1, PairCount -1].
frame_id Index of the frame containing the edge pair.
Edge2Radius
AdeptSight Reference Guide, v3.2.x, Updated: 5/8/2012
Page 177