Loadsequence – Adept AdeptSight Reference Guide User Manual
Page 318
LoadSequence
VPARAMETER
10301
This command code is not directly supported in AdeptSight 3.x at this time. Please
contact Adept Technical Support for programming options.
Loads the selected vision sequence file to the current vision project. The valid format for a vision sequence
file is hsseq.
Type
Long
Example
See SaveSequence for an example of the syntax and the use of all Load and Save properties.
Related Topics
LoadSequence
AdeptSight Reference Guide, v3.2.x, Updated: 5/8/2012
Page 318