Adept AdeptSight Reference Guide - Manual (Page 48)

ActiveCalibration
VPARAMETER
5504
Reads and writes the index of the active calibration relative to a camera.
Syntax
MicroV+
VPARAMETER (sequence_id, tool_id, 5504, index_id, object_id) = value
value = VPARAMETER (sequence_id, tool_id, 5504, index_id, object_id)
V+
VPARAMETER (sequence_id, tool_id, 5504, index_id, object_id) $ip = value
value = VPARAMETER ($ip, sequence_id, tool_id, 5504, index_id, object_id)
Type
Real variable.
Range
Minimum: 0
Maximum: The number of calibrations associated with the tool.
Parameters
sequence_id Index of the vision sequence. The first sequence is 1.
tool_id Index of the tool in the vision sequence. The first tool is 1.
ID 5504: the value used to reference this property.
index_id N/A
object_id N/A
$ip IP address of the vision server. Applies to V+ syntax only. Uses standard IP
address format, for example: 192.168.1.120.
ActiveCalibration
AdeptSight Reference Guide, v3.2.x, Updated: 5/8/2012
Page 48