Adept AdeptSight Reference Guide - Manual (Page 130)

CommunicationToolResults
VRESULT
2600
CommunicationToolResults reads the total number of results that have been queued by all
communication tools within a given sequence.
Syntax
Micro V+
value = VRESULT (sequence_id, tool_id, instance_id, 2600, index_id, frame_id)
V+
value = VRESULT ($ip, sequence_id, tool_id, instance_id, 2600, index_id, frame_id)
Type
Integer
Parameters
$ip IP address of the vision server. Applies to V+ syntax only. Uses standard IP
address format, for example: 192.168.1.120.
sequence_id Index of the vision sequence. The first sequence is 1.
tool_id Should always be set to -1.
instance_id Not used
ID 2600: the value used to reference this property.
index_id Not used
frame_id Not used
CommunicationToolResults
AdeptSight Reference Guide, v3.2.x, Updated: 5/8/2012
Page 130