Adept AdeptSight Reference Guide - Manual (Page 215)

FilterSaturationTolerance
VPARAMETER
5717
Value of the tolerance allowed for the saturation value defined by FilterSaturationValue, for the selected
filter. The FilterSaturationTolerance value is distributed equally above and below the
FilterSaturationValue.
For example, if FilterSaturationValue = 200 and FilterSaturationTolerance = 20, the filter will accept pixels
with a range of saturation values = [190,200].
Syntax
Micro V+
VPARAMETER (sequence_id, tool_id, 5717, filter_id, object_id) = value
value = VPARAMETER (sequence_id, tool_id, 5717, filter_id, object_id)
V+
VPARAMETER (sequence_id, tool_id, 5717, filter_id, object_id) $ip = value
value = VPARAMETER ($ip, sequence_id, tool_id, 5717, filter_id, object_id)
Remarks
When FilterSaturationTolerance = 1, no tolerance (variation) in saturation is accepted. The filter will
only accept pixels with a saturation value equal to FilterSaturationValue.
Type
Long
Range
Minimum: 1
Maximum: 128
Parameters
$ip IP address of the vision server. Applies to V+ syntax only. Uses standard IP
address format, for example: 192.168.1.120.
FilterSaturationTolerance
AdeptSight Reference Guide, v3.2.x, Updated: 5/8/2012
Page 215