Amer Networks E5Web GUI - Manual (Page 720)

Chapter 12: Advanced Settings
This chapter describes the additional configurable advanced settings for cOS Core that are not
already described in the manual. In the Web Interface or InControl these settings are found
under System > Advanced Settings.
The settings are divided up into the following categories:
Note: Activating setting changes
After any advanced setting is changed, the new cOS Core configuration must be
activated in order for the new value to take effect.
• IP Level Settings, page 720
• TCP Level Settings, page 724
• ICMP Level Settings, page 729
• State Settings, page 730
• Connection Timeout Settings, page 732
• Length Limit Settings, page 734
• Fragmentation Settings, page 737
• Local Fragment Reassembly Settings, page 741
• SSL Settings, page 742
• Miscellaneous Settings, page 744
12.1. IP Level Settings
Log Checksum Errors
Logs occurrences of IP packets containing erroneous checksums. Normally, this is the result of
the packet being damaged during network transport. All network units, both routers and
workstations, drop IP packets that contain checksum errors. However, it is highly unlikely for an
720