Amer Networks E5Web GUI - Manual (Page 434)

should be make sure there are no rules disallowing or allowing the same kind of ports/traffic
before these rules.
InControl
Follow the same steps used for the Web Interface below.
Web Interface
1. Go to: Policies > Add > IPRule
2. Now enter:
• Name: H323Out
• Action: NAT
• Service: H323-Gatekeeper
• Source Interface: lan
• Destination Interface: any
• Source Network: lan_net
• Destination Network: 0.0.0.0/0 (all-nets)
• Comment: Allow outgoing communication with a gatekeeper
3. Click OK
Note: Outgoing calls do not need a specific rule
There is no need to specify a specific rule for outgoing calls. cOS Core monitors the
communication between "external" phones and the Gatekeeper to make sure that it is
Chapter 6: Security Mechanisms
434