Amer Networks E5Web GUI User Manual
Page 634
Device:/> add Interface VLAN my_vlan_local
Ethernet=If3
VLANID=555
IP=If3_arbitrary_ip1
Network=If3_net
AutoSwitchRoute=Yes
C. Last, create a VLAN object on the L2TPv3 tunnel interface my_l2tpv3_if:
Device:/> add Interface VLAN my_vlan_l2tpv3
Ethernet=my_l2tpv3_if
VLANID=555
IP=If3_arbitrary_ip2
Network=If3_net
AutoSwitchRoute=Yes
InControl
Follow the same steps used for the Web Interface below.
Web Interface
A. First, define a L2TPv3 Server object:
1.
Go to: Network > Interfaces and VPN > L2TPv3 Servers > Add > L2TPv3 Server
2.
Now enter:
•
Name: my_l2tpv3_if
•
Inner IP Address: If3_ip
•
Local Network: If3_net
•
Outer Interface Filter: If2
•
Server IP: If2_ip
3.
Click OK
B. Next, create a VLAN object on the protected interface If3:
1.
Go to: Network > Interfaces and VPN > VLAN > Add > VLAN
2.
Select the If3 interface
3.
Now enter:
•
Name: my_vlan_local
•
Interface: If3
•
VLAN ID: 555
•
IP Address: If3_arbitrary_ip1
•
Network: If3_net
4.
Select the option Enable transparent mode
Chapter 9: VPN
634