Amer Networks E5Web GUI - Manual (Page 65)

• User Database: AdminUsers
• Interface: If2
• Network: all-nets
5. Click OK
2.1.9. Management Advanced Settings
Under the Remote Management section of the Web Interface or InControl a number of
advanced settings can be found. These are:
SSH Before Rules
Enable SSH traffic to the security gateway regardless of configured IP Rules.
Default: Enabled
WebUI Before Rules
Enable HTTP(S) traffic to the security gateway regardless of configured IP Rules.
Default: Enabled
Local Console Timeout
Number of seconds of inactivity until the local console user is automatically logged out.
Default: 900
NetCon Idle Timeout
Number of seconds of inactivity until the Netcon session is close.
Default: 600
NetCon Before Rules
For NetCon traffic to cOS Core: add an invisible rule to the IP rule set to allow Netcon traffic. If this
setting is disabled then NetCon traffic will be subject to the IP rule set like any other traffic.
Default: Enabled
NetConMaxChannels
For NetCon traffic to cOS Core the following number of connections are guaranteed for each
connection type:
• Consoles: 4
Chapter 2: Management and Maintenance
65