Adding a configuration object, Important: configuration changes must be activated – Amer Networks E5Web GUI User Manual
Page 69
InControl
Follow the same steps used for the Web Interface below.
Web Interface
1.
Go to: Objects > Services
2.
Select the telnet entry in the list
3.
In the Comments textbox, a suitable comment
4.
Click OK
Verify that the new comment has been updated in the list.
Important: Configuration changes must be activated
Changes to a configuration object will not be applied to a running system until the new
cOS Core configuration is activated.
Example 2.12. Adding a Configuration Object
This example shows how to add a new IP4Address object, here creating the IPv4 address
192.168.10.10, to the address book.
Command-Line Interface
Device:/> add Address IP4Address myhost Address=192.168.10.10
Show the new object:
Device:/> show Address IP4Address myhost
Property
Value
---------------------
-------------
Name:
myhost
Address:
192.168.10.10
UserAuthGroups:
NoDefinedCredentials:
No
Comments:
InControl
Follow the same steps used for the Web Interface below.
Web Interface
1.
Go to: Objects > Address Book
2.
Click on the Add button
3.
In the dropdown menu displayed, select IP Address
Chapter 2: Management and Maintenance
69