Amer Networks E5Web GUI User Manual
Page 561
Device:/> add IPRule Action=Allow
Service=all_services
SourceInterface=If1
SourceNetwork=client_net
DestinationInterface=If2
DestinationNetwork=all-nets
Name=client_access_rule
Create the RadiusRelay object:
Device:/> add RadiusRelay r_relay1
SourceInterface=If1
ClientIPFilter=client_ip_range
RemoteServerIP=radius_ip
DHCPServer=rr_dhcp_server
InControl
Follow the same steps used for the Web Interface below.
Web Interface
Create the IP4Address object that defines the range of client IP addresses for the UEs and assign it
the authentication group called ue_group:
1.
Go to: Objects > Address Book > Add > IP4 Address
2.
Now enter:
•
Name: client_net
•
IP Address: 192.168.10.0/24
•
User Authentication: ue_group
3.
Click OK
Create the IP4Address object that defines the IP address pool for the DHCP server. This must be a
different object although it uses almost the same IP range:
1.
Go to: Objects > Address Book > Add > IP4 Address
2.
Now enter:
•
Name: client_ip_range
•
IP Address: 192.168.10.10-192.168.10.255
3.
Click OK
Create the DHCPServer object that hands out these addresses:
1.
Go to: Network > Network Services > DHCP Servers > Add > DHCPServer
2.
Now enter:
•
Name: rr_dhcp_server
•
Interface Filter: client_ip_range
Chapter 8: User Authentication
561