Amer Networks E5Web GUI User Manual
Page 595
Command-Line Interface
First create an Identification List:
Device:/> add IDList MyIDList
Then, create an ID:
Device:/> cc IDList MyIDList
Device:/MyIDList> add ID JohnDoe
Type=DistinguishedName
CommonName="John Doe"
OrganizationName=Clavister
OrganizationalUnit=Support
Country=Sweden
[email protected]
Device:/MyIDList> cc
Finally, apply the Identification List to the IPsec tunnel:
Device:/> set Interface IPsecTunnel MyIPsecTunnel
AuthMethod=Certificate
IDList=MyIDList
RootCertificates=AdminCert
GatewayCertificate=AdminCert
InControl
Follow the same steps used for the Web Interface below.
Web Interface
First create an Identification List:
1.
Go to: Objects > VPN Objects > IKE ID Lists > Add > ID List
2.
Enter a name for the list, for example MyIDList
3.
Click OK
Then, create an ID:
1.
Go to: Objects > VPN Objects > IKE ID Lists > Add > ID List
2.
Select MyIDList
3.
Enter a name for the ID, for example JohnDoe
4.
Select Distinguished name in the Type control
5.
Now enter:
•
Common Name: John Doe
•
Organization Name: Clavister
•
Organizational Unit: Support
Chapter 9: VPN
595