Amer Networks E5Web GUI - Manual (Page 351)

Device:/> add IPRule Action=Allow
Service=http
SourceInterface=wan
SourceNetwork=all-nets
DestinationInterface=dmz
DestinationNetwork=wan_ip
Name=http_wan_to_dmz
InControl
Follow the same steps used for the Web Interface below.
Web Interface
Configure the interfaces:
1. Go to: Network > Interfaces and VPN > Ethernet
2. Select the lan interface
3. Now enter:
• IP Address: 10.0.0.1
• Network: 10.0.0.0/24
• Transparent Mode: Disable
• Add route for interface network: Disable
4. Click OK
5. Go to: Network > Interfaces and VPN > Ethernet
6. Select the dmz
7. Now enter:
• IP Address: 10.0.0.2
• Network: 10.0.0.0/24
• Transparent Mode: Disable
• Add route for interface network: Disable
8. Click OK
Configure the interface groups:
1. Go to: Network > Interfaces and VPN > Interface Groups > Add > InterfaceGroup
2. Now enter:
• Name: transparent_group
• Security/Transport Equivalent: Disable
• Select the interfaces lan and dmz
Chapter 4: Routing
351