Amer Networks E5Web GUI - Manual (Page 181)

illustrated below.
Figure 3.3. Components of Loopback Interface Setup
The example below explains the detailed management user interface steps required for creating
a loopback pair.
Example 3.18. Creating a Loopback Interface Pair
This example shows how to create a Loopback Interfaces pair.
Web Interface
A. Create the first loopback interface
1. Go to: Network > Interfaces and VPN > Loopback > Add > Loopback Interface
2. Under General enter:
• Name: enter a suitable name. For example vr1-main
• Loop to: Leave this field blank for now
3. Under IP Address enter:
• IP Address: the IP address of the interface
• Network: the network for the interface
4. Click OK
Chapter 3: Fundamentals
181