Amer Networks E5Web GUI - Manual (Page 120)

can explicitly choose the driver from a list using the -force_driver option.
The index number of the PCI card is first identified from the output of the pciscan -all command.
If the card number index is found to be 7 and the driver to choose is E1000 then the command is:
Device:/> pciscan -force_driver 7 E1000
The command offers tab completion for the available driver names so it is not necessary to know
them in advance. It may be the case that a process of trial and error is required to identify the
correct driver for the card.
Chapter 2: Management and Maintenance
120