Amer Networks E5Web GUI - Manual (Page 183)

Device:/> add Interface InterfaceGroup examplegroup
Members=exampleIf1,exampleIf2
InControl
Follow the same steps used for the Web Interface below.
Web Interface
1. Go to: Network > Interfaces and VPN > Interface Groups > Add > InterfaceGroup
2. Enter the following information to define the group:
• Name: The name of the group to be used later
• Security/Transport Equivalent: If enabled, the interface group can be used as a
destination interface in rules where connections might need to be moved between the
interfaces.
• Interfaces: Select the interfaces to be in the group
3. Click OK
Chapter 3: Fundamentals
183