Amer Networks E5Web GUI User Manual
Page 644
1.
Go to: Network > Interfaces and VPN > SSL > Add > SSL VPN Interface
2.
Now enter:
•
Specify a suitable name, in this example my_sslvpn_if
•
Inner IP: sslvpn_inner_ip
•
Outer Interface: If2
•
Server IP: sslvpn_server_ip
•
IP Pool: sslvpn_pool
3.
Click the tab Add Route
4.
Select the If3 interface in the Available list and press the ">>" button to move it into the
Selected list
5.
Click OK
2. Create an Authentication Rule
Command-Line Interface
Device:/> add UserAuthRule
Interface=my_sslvpn_if
AuthSource=Local
LocalUserDB=LocalUserDB
OriginatorIP=all-nets
Agent=PPP
TerminatorIP=sslvpn_server_ip
Name=ssl_login
InControl
Follow the same steps used for the Web Interface below.
Web Interface
1.
Go to: Policies > User Authentication User Authentication Rules > Add > User
Authentication Rule
2.
Now enter:
•
Name: ssl_login
•
Agent: L2TP/PPTP/SSL VPN
•
Authentication Source: Local
•
Interface: my_sslvpn_if
•
Originator IP: all-nets (a more specific range is more secure)
•
Terminator IP: sslvpn_server_ip
3.
Click OK
The new cOS Core configuration should now be deployed.
Chapter 9: VPN
644