Settings summary for date and time, Forcing time synchronization – Amer Networks E5Web GUI User Manual
Page 234
Example 3.40. Forcing Time Synchronization
This example demonstrates how to force time synchronization, overriding the maximum
adjustment setting.
Command-Line Interface
Device:/> time -sync -force
Synchronization Intervals
The interval between each synchronization attempt can be adjusted if needed. By default, this
value is 86,400 seconds (1 day), meaning that the time synchronization process is executed once
in a 24 hour period.
3.9.4. Settings Summary for Date and Time
Below, is a summary of the various settings for date and time:
Time Zone
Time zone offset in minutes.
Default: 0
DST Offset
Daylight saving time offset in minutes.
Default: 0
DST Start Date
What month and day DST starts, in the format MM-DD.
Default: none
DST End Date
What month and day DST ends, in the format MM-DD.
Default: none
Time Sync Server Type
Type of server for time synchronization, UDPTime or SNTP (Simple Network Time Protocol).
Default: SNTP
Chapter 3: Fundamentals
234