beautypg.com

Amer Networks E5Web GUI User Manual

Page 510

background image

Create a SAT rule for the translation:

Device:/> add IPRule Action=SAT

Service=http
SourceInterface=any
SourceNetwork=all-nets
DestinationInterface=wan
DestinationNetwork=wwwsrv_pub
SATTranslateToIP=wwwsrv_priv_base
SATTranslate=DestinationIP

Finally, create an associated Allow Rule:

Device:/main> add IPRule Action=Allow

Service=http
SourceInterface=any
SourceNetwork=all-nets
DestinationInterface=wan
DestinationNetwork=wwwsrv_pub

InControl

Follow the same steps used for the Web Interface below.

Web Interface

Create an address object for the public IPv4 address:

1.

Go to: Objects > Address Book > Add > IP4 Address

2.

Specify a suitable name for the object, for example wwwsrv_pub

3.

Enter 195.55.66.77 - 195.55.66.77.81 as the IP Address

4.

Click OK

Now, create another address object for the base of the web server IP addresses:

1.

Go to: Objects > Address Book > Add > IP4 Address

2.

Specify a suitable name for the object, for example wwwsrv_priv_base

3.

Enter 10.10.10.5 as the IP Address

4.

Click OK

Publish the public addresses on the wan interface using ARP publish. One ARP item is needed for
every IP address:

1.

Go to: Network > Interfaces and VPN > ARP/Neighbor Discovery > Add > ARP/Neighbor
Discovery

2.

Now enter:

Mode: Publish

Interface: wan

IP Address: 195.55.66.77

Chapter 7: Address Translation

510

This manual is related to the following products: