Deleting a configuration object, Undeleting a configuration object – Amer Networks E5Web GUI User Manual
Page 70
4.
In the Name text box, enter myhost
5.
Enter 192.168.10.10 in the IP Address textbox
6.
Click OK
7.
Verify that the new IP4 address object has been added to the list
Example 2.13. Deleting a Configuration Object
This example shows how to delete the newly added IP4Address object.
Command-Line Interface
Device:/> delete Address IP4Address myhost
InControl
Follow the same steps used for the Web Interface below.
Web Interface
1.
Go to: Objects > Address Book
2.
Right-click on the row containing the myhost object
3.
In the dropdown menu displayed, select Delete
The row will be rendered with a strike-through line indicating that the object is marked for
deletion.
Example 2.14. Undeleting a Configuration Object
A deleted object can always be restored until the configuration has been activated and
committed. This example shows how to restore the deleted IP4Address object shown in the
previous example.
Command-Line Interface
Device:/> undelete Address IP4Address myhost
InControl
Follow the same steps used for the Web Interface below.
Web Interface
1.
Go to: Objects > Address Book
2.
Right-click on the row containing the myhost object
Chapter 2: Management and Maintenance
70